I think everybody on here is constantly keeping an eye out for what to host next. Sometimes you spinup something which chugs along nicely but sometimes you find out you’ve been missing out.
For me it’s not very refreshing or new: Paperless-ngx. Never thought I would add all my administration to it. But it’s great. I probably can’t find the thing I need, but I should have a record of every mail or letter I’ve gotten. Close second is Wanderer. But I would like to have a little bit more features like adding recorded routes to view speed and compare with previous walks. But that’s not what it is intended for.
What is that service for you?
Never knew I needed? Another vote for Paperless-ngx. I still feel like I’m living in the future using it. The trick I’ve found was initially setting up a good document naming & management convention & following it religiously for every document. The search function is fantastic at narrowing down results. Used in conjunction with specific coloured tags I can immediately see what I need from search results.
Fired up Immich recently. Amazing. Will be donating as I like their stance.
I also enjoy Linkwarden. Switched from the also excellent Hoarder as I prefer the UI.
Most used? Nextcloud with Joplin.
@saltarello@lemmy.world funnily enough, I switched from Linkwarden to Hoarder. I like the smart lists. Just bookmark everything, check it later.
A clone of 12ft.io but the old version before they got into beef with the New York Times and kneecapped it. It doesn’t work on every single article with a paywall but it works on the overwhelming majority (including New York Times articles)
And it doesn’t really count because I knew I’d use it but komga+komf+fmd2. I list it though because I didn’t realize I’d use this stack so much. I can now read with my phone, my laptop, my ereader, etc. tachiyomi/mihon works, reading progress is synced, and I never have to visit one of those garbage manga aggregation sites ever again
Would you mind sharing links?
oh duh
https://github.com/wasi-master/13ft/blob/main/docker-compose.yaml - this is the 12ft.io replacement i use. there are a few clones but this is the one I like, it’s real barebones and uses very little overhead
https://komga.org/ - komga library https://github.com/Snd-R/komf - komf - this isn’t strictly necessary but it fetches metadata for your komga library from sites like manga updates. can be a bit of a pain to configure https://github.com/Snd-R/komf-userscript - this is a tampermonkey script that makes komf MUCH easier to use https://github.com/dazedcat19/FMD2 - this is an app that rips manga from most of the “free manga” indexer sites like mangadex, bato, etc. docker and kubernetes version at https://github.com/ElryGH/docker-FMD2
you can read directly via komga web but frankly it kind of sucks for that. i prefer using an app. tachiyomi was the gold standard but companies threatened it and they stopped development. there are several forks now that are all good in various ways. i prefer mihon https://mihon.app/ but there are alternatives that have different feature sets
I’d say the ARR suite but I knew beforehand that would need it. I just love that I can access overseerr, search up and coming and already out content, click “request”, and then magically it just shows up on my plex after a couple minutes.
A service that I host that I never knew I needed is Nextcloud. Works exactly the way OneDrive worked for me. I record footage on my phone, upload it to Nextcloud, and log onto any computer of mine in the house and can edit the footage. Sometimes I edit footage in VR while I play XPlane, then I’ll save it, turn everything off, and continue right where I left off on my laptop.
Probably super basic but locally syncing things is a godsend to the way I used to do things (KDE connect transfers footage from my phone to a single computer).
Layering on top of that (I’m sorry to recommend a discord app) but, Requestarr is awesome as well. It allows you to attach a bot to a channel and request up through Overseer, Sonarr or Radarr. Works for local and remote users.
Man, I read the title and wanted to commebt paperless ngx before reading your post.
FreshRSS, i had it installed and setup with a fee feeds for over a year and only like this month has it become my daily read, i can get almost everything in there to just read through while I drink my coffee, sites I bookmarked but never go to can now come to me.
Also with ‘five filters full text rss’ to get all the images in the feed
What’s the extension for? FreshRSS can fetch contents natively.
The extension is to get the rss link to paste into five filters
Five filters takes the link and gets all the images and all that then makes a new rss link that you give to fresh rss.
When I tried just fresh rss a lot of the sites I tried wouldn’t get me images or it would be just the headline and I would have to click the link and go to the actual site to read the article
I’m still not sure that filter thing is necessary. FreshRSS can fetch content and images using the CSS selector of the website. You may want to check out the Advanced section in their documentation: https://freshrss.github.io/FreshRSS/en/users/04_Subscriptions.html#retrieve-a-truncated-feed-from-within-freshrss
Anyway, whatever works for you :)
Would you mind elaborating a bit? I’ve been looking into good rss solutions lately and blogs without a feed were where I got stuck. How do you use five filters? How do the two components work together?
Here’s a short blog post that summarizes how to use Full-Text RSS with FreshRSS. It’s a bit of a pain to add new feeds but it makes for a smooth experience afterwards.
Otherwise, you could always just use RSS clients that have the ability to fetch full articles, Read You on Android and Fluent Reader on desktop both can do this.
That plus a browser extension that finds the right rss feed for you like get rss feed url on firefox.
I copy the rss with the extension
Then I paste that into five filters
Use that to give it to fresh rss which will get me a nice looking post with images and textWhich extension do you use?
I’m not the person you replied to, but they say in their comment they use Get RSS Feed URL.
Thanks. Do you host five filters? Do you pay for it?
Yeah i host five filters, fresh rss, and a mariadb container for fresh rss
I personally don’t host the firefox extension I just found it recommend on reddit to get rss urls from sites that don’t have a link
Love FreshRSS. It really is something that I didn’t know I needed. I often switch RSS apps, and it allows for seemless transitions.
what do you mean you often switch apps ?
I think there one I never expected would be Kitchenowl. Shopping list, recipe list, planner for food, expenses… very useful for a joined household.
That’s easily Home Assistant. It got me into the whole home automation stuff and I have gradually included more and more parts into it - including some health related stuff. It really makes my family’s life easier and helps us organizing it.
You’ve got a good point with Home Assistant. I have automations setup so that I barely have to do anything manually. So I almoat forget that Home Assistant runs quite a lot in my home. And especially in the beginning it was nice to setup but not really needed. Know it is needed.
Are you able to provide a few quick examples? I have it installed but don’t know what to do with it really.
The easiest thing: We use a motion sensor to automatically turn on the light for the stairs. You wouldn’t need Home Assistant for that, but with a little more configuration you can adjust the light levels and colour temperature based on the time of day (not as disturbing at night). We have two rooms which have problems with humidity in one a fan is automatically turned on (basic) in the other a dehumidifier is triggered based on the outside and inside temperature because there are large windows which are producing a lot of condensation otherwise. Now the really specific stuff: My daughter has Diabetes and we need to manage her blood glucose levels. There are alarms but ideally you would act before they are triggered. So we hooked her blood glucose levels to a light in our bedroom which turns on at night if her levels are getting out of bounds at night. That way she isn’t woken by the alarm, but by one of us and can go back to sleep mich quicker.
Damned, I have to say that the glucose surveillance is quiet impressive, and the outcome is both unexpected and so sweet ! And shows how much can be done.
https://github.com/Waterboy1602/Addarr
I use this all the time instead of opening Radarr and Sonarr
Posted above, I’ll drop it here as well, requestarr performs the same service but via discord.
Isn’t this a bit more steps than using Overseer?
It’s more work to set up, but a much easier experience if you have users who can’t remotely access Overseerr. You always have to account for the “mom factor” when hosting services; Will your mom be able to learn how to use it? My mom can use Discord, but good luck getting her to learn Tailscale to access my Overseerr remotely.
Been using anytype.io (self-hosted) for a month now and it has been amazing.
Using it as a journal, bookmark manager, general note taking, etc…
Immich! Backs up my phone pictures for my family with automatic backup through an easy app interface. Knowing my large album of photos on my phone won’t be tied to an endless growing subscription fees for…ever?!
Same!
Did not realize how good it is to have digital albums with the family! And also having a backup is great as well, for a peace of mind.
Is this accessible outside your own home network, or is it restricted to local?
It’s very accessible with a reverse proxy. Just please be secure if you choose to do so. It’s been a wonderful piece of software and i will be paying for the lifetime server license this weekend.
Same as any piece of software you’re hosting, it’s up to you to decide. I run my instance on my Hetzner vm.
Immich is fantastic. Yes.
Easily set up, and easily attached to other things. Simple notifications about whatever is needed, like service health or updates, new posts on public platforms, etc. A simple
curlis plenty to send and receive notifications, and it works on Android without requiring FCM (Google infrastructure).Another alternative: https://pushover.net/
Sadly it doesn’t work with CrowdSec which is the biggest thing I would want notifications on (bans and such) and Gotify isn’t the pub/sub MQTT-style that I like about ntfy…
I’m a long time Pushover user and recently set it up with CrowdSec.
If a curl is sufficient for ntfy as well, you should be able to adapt the http-plugin.
Ntfy can act as an email server if you configure it. So if an application is not supporting ntfy directly but email, you can go that route. Ntfy will then simply forward the email as push notification. Its also pretty simple to set up, used this as a workaround because authelia doesn’t support it directly. Here is the link to the specific ntfy documentation: https://docs.ntfy.sh/config/#e-mail-publishing
I used the local variant (https://docs.ntfy.sh/config/#local-only-email) which does not require any DNS entries, as I only use it for sending notifications between my self hosted containers (all on the same host).
Alternative: Gotify
Tangent to this, “Apprise lets you send notifications to a large number of support notification services.”
Kavita for my ebook collection—mostly tabletop RPGs, but some comics and sci fi as well.
I don’t actually use the web interface that often. I add books to my Kavita library, then scan the OPDS feed into my scratch-my-own-itch mobile app, Bookoscope, and download whatever I want to read onto my tablet from there.
Side note, PDFs are the absolute worst. Even reading them on a full-sized tablet is incredibly annoying. Anybody have any tips/tricks/apps for that?
I usually convert pdfs to epub if its something I actually need to read and not just scan/browse. Often I would bother to even edit the epub in Sigil to fix any problems with the conversion.
Syncthing. Decentralized data backup that works with minimal setup. Now I can add cloud sync to most any app.
Watch out to enable “keep on delete” features. I didn’t do that and didn’t see that gigabytes of personal photos got deleted which I had to recover from an old backup. Still don’t know how it happened as I only found out a few weeks after the fact.
Sync is not backup! If there’s a software bug or a wrong setting sync can delete your files. Syncthing is pretty mature so I doubt this was a Syncthing bug, however you shouldn’t only trust Syncthing. I’m doing btrfs snapshots weekly and delete them after three years for important folders nowadays.
I setup my own with a bash script for backup years ago that uses rsync, feel too invested in that now to change
I host Immich, Jellyfin , readeef, and open-webui for myself. From those, Immich is definitely the unlikely hero of the bunch
IIRC immich is like a google photos replacement. I use nextcloud for that on android but it’s not so simple on ios. How’s immich for ios, do uploads work automatically in the background? How’s performance?
Background backup works mostly ok. There are times where I need to go to the backup view for it to get going, but those are not that common. The performance is excellent so far
Forgejo. There are so many things that can use a git repo but I don’t want to have them out in the wild, so I host them myself, safe and sound behind my firewall.
I also mirror other github forks so they don’t go away whenever those services decide to rugpull them.
I started with gitea but found it difficult to backup. I’ve been using gogs for a while now and find it minimal and easy to administrate.
I host foregejo, but I have a small problem. I can’t get my ssh keys to work for cloning repos. I can’t only use https.
Is port 22 accessible and pointed at it? You could also run it on an alternate port and specify that port in your ssh config.
I’m using a different port and have it in my config. Sadly that didn’t work too 😭
In both client config and forgejo config? And docker config?
It’s working for me, but I had to add a config to my ~/.ssh/config file
I’ll check my docker config when I get home to make sure.
I use API tokens. Seems to work fine for mirroring.
Do you manually mirror and keep the forks up to date? Or is there an automation for it?
There’s automation and you can do it manually if needed. For example I have a couple of emulators that pull every 24 hours from GitHub just in case nint tendo gets a little lawsuit heavy. I also have one offs from GitHub that pull down when I want.
You can also mirror a public repo from GitHub into a private repo so it does not gets indexed/ai trained.
