You must log in or register to comment.
My servers are up
Following this post I installed paperless. It’s amazing.
Decided to buy a raspberry pi, it arrived, I installed pihole on it and put it into my dad’s house, all in a few days. Biggest win: I just took action and did it, instead of researching, brainstorming and writing down stuff for weeks and then never execute.
All of my apps are running without issue. First time in months
The nextcloud AIO instance that hadn’t been working since September suddenly started working after I updated it. This was all after their forums did fuck all to help except tell me to get gud. I knew the problem wasn’t on me or my config and I feel so vindicated
Have you had a look at opencloud? Not many addons, but simple-ish cloud drive and docs and such. Does not use many resources.
The table (dm) might finally make the switch from roll20 to foundry for a campaign!
This week I saw my 3 machine cluster flailing trying to stay online, digging around identified it as an issue with communication with my NAS. It was running NFS3 and so I swapped that to NFS4.1 and did some tuning and now my services have never been faster!
I finally got around to installing Jellyfin. Still trying to get hardware transcoding working. I think I have it set up, but it still wants to use the CPU. I’m thinking permissions but I ran out of time.
Fun project.
I think QSV is the new “easiest” way if you have an Intel CPU. Here are some docker compose values that might help:
group_add: - "110" - "44" devices: - /dev/dri/renderD128:/dev/dri/renderD128110isrender44isvideoYou can
grep render /etc/groupto find your values.I found CPU accelerated transcoding to be as effective as using GPU acceleration for my small media server setup. Nvidia wasn’t worth it for me.
Oh thanks! I didn’t have the group_add.
I plugged in an NVIDIA gpu in my server and enabled ollama to use it, diligently updated my public wiki about it and now enjoying real time gpt: OSS model responses!
I was amazed, time cut from 3-8 minutes down to seconds. I have a Intel Core7 with 48gb ram, but even an oldish gpu beats the crap out of it.
Acronyms, initialisms, abbreviations, contractions, and other phrases which expand to something larger, that I’ve seen in this thread:
Fewer Letters More Letters AP WiFi Access Point CA (SSL) Certificate Authority DNS Domain Name Service/System Git Popular version control system, primarily for code IMAP Internet Message Access Protocol for email IP Internet Protocol SMTP Simple Mail Transfer Protocol SSL Secure Sockets Layer, for transparent encryption TLS Transport Layer Security, supersedes SSL VPN Virtual Private Network VPS Virtual Private Server (opposed to shared hosting) XMPP Extensible Messaging and Presence Protocol (‘Jabber’) for open instant messaging k8s Kubernetes container management package
[Thread #142 for this comm, first seen 7th Mar 2026, 06:40] [FAQ] [Full list] [Contact] [Source code]
I got a test box set up with nixos and a config that runs all of my services. I wanted to test the declarative rebuild promise of it, so I:
- Filled the services with my some of my backed up data (a copy of the data, not the actual backup)
- Ran it for a few days using some of the services
- Backed up the data of the nixos test server, as well as the nixos config
- Reinstalled nixos on the test box, brought in the config, and rebuilt it.
And it worked!!! All serviced came back with the data, all configuration was correct.
I’m going to keep testing, and depending on how that goes I may switch my prod server and nas to nixos.
Very cool!
Re: the backup / restore of state in NixOS: I found myself writing the same things over and over again for each VM/service, so finally wrote this wrapper module (in action e.g. here for Jellyfin), which confgures both the backup services and timers, as well as adding a simple
rsync-restore-jellyfincommand to the system packages. In case you find this useful and don’t already have your own abstractions, or a sufficiently different use case 😄
Finally took the time to setup Woodpecker CI to replace Drone. Also finally linked it not only to my self hosted gitea, but also to github, so I can automate a few builds there as well.
In the process I also learned, that I can set up a whole bunch of pods in a single kube definition for podman/quadlets, which allows me to have a much cleaner setup. Previously I was only aware that you can define a single pod with multiple containers. It makes sense, but it never occurred to me before.
I’m redoing everything I have from scratch. This week I have FreeIPA set up from OpenTofu + Ansible configs, and enrolls most of my other servers against FreeIPA. I am still migrating TrueNAS to use FreeIPA’s Kerberos Realm for auth, and I need to chown a lot of files for the new UIDs and GIDs homed in FreeIPA. After that, I’m setting up FreeRadius for auth to switches, APs, and Wifi. And then after that, I’m back to overhauling my k8s stack. I have Talos VMs running but didn’t finish patching in Cilium. And after the real fun begins.
I had enough time to install sort of pihole.
I’ll go first: I got XMPP (Prosody) setup for the family.
Also, less this week (cheating a little), but I’ve setup all my services with SSL (self-hosted root CA), domain names, and (finally) a dashboard (Heimdall.)Edit: I can’t sepll.
Nice, same! Was also really positively surprised by how great the Android app(s) for XMPP feel.
Only thing not working yet for me is group chat creation. Oh well. Maybe this weekend.
On the other hand though, voice and video calls have worked flawlessly.
Nice, same! Was also really positively surprised by how great the Android app(s) for XMPP feel.
We’re on iOS and I wish I could say the same. Looking at the Android apps makes me very jealous.
Only thing not working yet for me is group chat creation. Oh well. Maybe this weekend.
What server software are you using? I went with Prosody and it felt pretty easy to setup the muc module for groups, but, on the other hand, I haven’t gotten around to voice and video calls.
Ah, too bad. IMO better clients would make it drastically easier to convince people to switch.
Hm, I can create groups (also with muc), and the other members are added, but writing a message triggers “x left the group” for everyone. Dunno. Probably something trivial I overlooked. But honestly… Weather is too good today to be bothered 😄
Ah, I already had a TURN/STUN coturn server set up for matrix and jitsi, so it was just a matter of telling prosody about that. So I cheated a little I guess 😄 Here is my full config for that, in the unlikely event that you’re using NixOS.
